blob: 8df879e63dbedeaad1cf755eb92cd2fcb42ff012 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
|
---
title: OpenBSD softraid monitoring
date: 2021-04-30
description: How to properly check a software raid array on OpenBSD
tags:
- OpenBSD
---
## Introduction
I have reinstalled my nas recently from gentoo to OpenBSD and was amazed once again at how elegant OpenBSD is. The softraid setup was simple thanks to the wonderful [faq](https://www.openbsd.org/faq/faq14.html#softraid). The only thing I changed is that I used a raid5 with 3 disks, but the last line of the faq about the monitoring left the matter as an exercise to the reader.
## Softraid monitoring
I had a hard time figuring out how to properly monitor the state of the array without relying on parsing the output of `bioctl` but at last here it is in all its elegance :
```sh
root@nas:~# sysctl hw.sensors.softraid0
hw.sensors.softraid0.drive0=online (sd4), OK
```
I manually failed one drive (with `bioctl -O /dev/sd2a sd4`) then rebuilt it (with `bioctl -R /dev/sd2a sd4)`... then failed two drives in order to have examples of all possible outputs. Here they are if you are interested :
```sh
root@nas:~# sysctl hw.sensors.softraid0
hw.sensors.softraid0.drive0=degraded (sd4), WARNING
```
```sh
root@nas:~# sysctl hw.sensors.softraid0
hw.sensors.softraid0.drive0=rebuilding (sd4), WARNING
```
```sh
root@nas:~# sysctl -a |grep -i softraid
hw.sensors.softraid0.drive0=failed (sd4), CRITICAL
```
## Nagios check
I am still using nagios on my personal infrastructure, here is the check I wrote if you are interested :
```perl
#!/usr/bin/env perl
###############################################################################
# \_o< WARNING : This file is being managed by ansible! >o_/ #
# ~~~~ ~~~~ #
###############################################################################
use strict;
use warnings;
##### Arguments processing #####
use Getopt::Long;
my $diskname;
my $usage = "Usage: $0 [OPTIONS]
OPTIONS:
-d DEVICE_NAME, --device-name=DEVICE_NAME : device name to inspect.";
GetOptions("device-name=s" => \$diskname) or die $usage;
die "You must provide a device-name\n\n$usage" unless $diskname;
##### Softraid Check #####
my %output = (
"code" => 3,
"status" => "UNKNOWN",
);
if (`uname` eq "OpenBSD\n") {
$output{status} = $1 if `sysctl hw.sensors.$diskname.drive0` =~ /=(.*)$/ or do { $!=3; die "UNKNOWN Failed to get sysctl hw.sensors.$diskname.drive0" };
$output{code} = 0 if ($output{status} =~ /OK$/);
$output{code} = 1 if ($output{status} =~ /WARNING$/);
$output{code} = 2 if ($output{status} =~ /CRITICAL$/);
}
print $output{status};
exit $output{code};
```
|
