Refactored syntax highlighting shortcodes into markdown

content/blog/OpenBSD/relayd-httpd-example.md

@@ -14,7 +14,7 @@ The goal was to have a relayd configuration that would serve urls like `https://
 
 ## The httpd configuration
 
-{{< highlight txt >}}
+```nginx
 prefork 5
 
 server "example.com" {
@@ -35,11 +35,11 @@ server "example.com" {
             root "/htdocs/www/public/"
     }
 }
-{{< /highlight >}}
+```
 
 ## The relayd configuration
 
-{{< highlight txt >}}
+```cfg
 log state changes
 log connection errors
 prefork 5
@@ -93,4 +93,4 @@ relay "wwwsecure6" {
     forward to <httpd> port 8080
     forward to <synapse> port 8008
 }
-{{< /highlight >}}
+```

content/blog/OpenBSD/softraid_monitoring.md

@@ -13,32 +13,32 @@ I have reinstalled my nas recently from gentoo to OpenBSD and was amazed once ag
 ## Softraid monitoring
 
 I had a hard time figuring out how to properly monitor the state of the array without relying on parsing the output of `bioctl` but at last here it is in all its elegance :
-{{< highlight sh >}}
+```sh
 root@nas:~# sysctl hw.sensors.softraid0
 hw.sensors.softraid0.drive0=online (sd4), OK
-{{< /highlight >}}
+```
 
 I manually failed one drive (with `bioctl -O /dev/sd2a sd4`) then rebuilt it (with `bioctl -R /dev/sd2a sd4)`... then failed two drives in order to have examples of all possible outputs. Here they are if you are interested :
-{{< highlight sh >}}
+```sh
 root@nas:~# sysctl hw.sensors.softraid0
 hw.sensors.softraid0.drive0=degraded (sd4), WARNING
-{{< /highlight >}}
+```
 
-{{< highlight sh >}}
+```sh
 root@nas:~# sysctl hw.sensors.softraid0
 hw.sensors.softraid0.drive0=rebuilding (sd4), WARNING
-{{< /highlight >}}
+```
 
-{{< highlight sh >}}
+```sh
 root@nas:~# sysctl -a |grep -i softraid
 hw.sensors.softraid0.drive0=failed (sd4), CRITICAL
-{{< /highlight >}}
+```
 
 ## Nagios check
 
 I am still using nagios on my personal infrastructure, here is the check I wrote if you are interested :
 
-{{< highlight perl >}}
+```perl
 #!/usr/bin/env perl
 ###############################################################################
 #     \_o<     WARNING : This file is being managed by ansible!      >o_/     #
@@ -71,4 +71,4 @@ if (`uname` eq "OpenBSD\n") {
 
 print $output{status};
 exit $output{code};
-{{< /highlight >}}
+```

content/blog/OpenBSD/wireguard-firewall.md

@@ -13,7 +13,7 @@ tage:
 Now that we covered wireguard configurations and routing, let's consider your firewall configuration in several scenarios. This first article will focus on OpenBSD.
 
 ## Template for this article
-```
+```cfg
 table <myself>   const { self }
 table <private>  const { 10/8, 172.16/12, 192.168/16, fd00::/8 fe80::/10 }
 table <internet> const { 0.0.0.0/0, !10/8, !172.16/12, !192.168/16, ::/0, fe80::/10, !fd00::/8 }
@@ -48,7 +48,7 @@ With our template, you can already use your wireguard vpn as a client without an
 ## Reachable client
 
 To make your client reachable over wireguard, add the following:
-```
+```cfg
 pass in on wg0 from <private> to <myself>
 ```
 
@@ -59,7 +59,7 @@ In this example I use the `<private>` pf table that I find both very convenient
 ## Server
 
 A server's configuration just need to accept wireguard connections in addition of the previous rule:
-```
+```cfg
 pass in on egress proto udp from <internet> to <myself> port 342
 pass in on wg0 from <private> to <myself>
 ```
@@ -67,7 +67,7 @@ pass in on wg0 from <private> to <myself>
 ## Hub
 
 As seen in the previous routing article, a hub is a server that can route traffic to another one over wireguard:
-```
+```cfg
 pass in on egress proto udp from <internet> to <myself> port 342
 pass in on wg0 from <private> to <private>
 ```

content/blog/ansible/ansible-vault-example.md

@@ -9,31 +9,31 @@ tags:
 ## Editing a protected file
 
 Here is how to edit a vault protected file :
-{{< highlight sh >}}
+```sh
 ansible-vault edit hostvars/blah.yml
-{{< / highlight >}}
+```
 
 ## Using a vault entry in a task or a jinja template
 
 It is as simple as using any variable :
-{{< highlight yaml >}}
+```yaml
 - copy:
     path: /etc/ssl/private.key
     mode: 0400
     content: '{{ ssl_key }}'
-{{< / highlight >}}
+```
 
 ## How to specify multiple lines entries
 
 This is actually a yaml question, not a vault one but since I ask myself this frequently in this context here is how to put a multiple lines entry like a private key in vault (for a simple value, just don't use a `|`):
 
-{{< highlight yaml >}}
+```yaml
 ssl_key : |
   ----- BEGIN PRIVATE KEY -----
   blahblahblah
   blahblahblah
   ----- END PRIVATE KEY -----
-{{< /highlight >}}
+```
 
 ## How to run playbooks when vault values are needed
 

content/blog/ansible/custom-fact.md

@@ -21,12 +21,12 @@ The facts will be available to ansible at `hostvars.host.ansible_local.<fact_nam
 ## A simple example
 
 Here is the simplest example of a fact, let's suppose we make it `/etc/ansible/facts.d/mysql.fact` :
-{{< highlight sh >}}
+```sh
 #!/bin/sh
 set -eu
 
 echo '{"password": "xxxxxx"}'
-{{< /highlight >}}
+```
 
 This will give you the fact `hostvars.host.ansible_local.mysql.password` for this machine.
 
@@ -36,15 +36,15 @@ A more interesting example is something I use with small webapps. In the contain
 provision a database with a user that has access to it on a mysql server. This fact ensures that on subsequent runs we will stay idempotent.
 
 First the fact from before, only slightly modified :
-{{< highlight sh >}}
+```sh
 #!/bin/sh
 set -eu
 
 echo '{"password": "{{mysql_password}}"}'
-{{< /highlight >}}
+```
 
 This fact is deployed with the following tasks :
-{{< highlight yaml >}}
+```yaml
 - name: Generate a password for mysql database connections if there is none
   set_fact: mysql_password="{{ lookup('password', '/dev/null length=15 chars=ascii_letters') }}"
   when: (ansible_local.mysql_client|default({})).password is undefined
@@ -75,16 +75,16 @@ This fact is deployed with the following tasks :
     password: '{{ansible_local.mysql_client.password}}'
     state: present
   delegate_to: '{{mysql_server}}'
-{{< /highlight >}}
+```
 
 ## Caveat : a fact you deploy is not immediately available
 
 Note that installing a fact does not make it exist before the next inventory run on the host. This can be problematic especially if you rely on facts caching to speed up ansible. Here
 is how to make ansible reload facts using the setup tasks (If you paid attention you already saw me use it above).
-{{< highlight yaml >}}
+```yaml
 - name: reload ansible_local
   setup: filter=ansible_local
-{{< /highlight >}}
+```
 
 ## References
 

content/blog/ansible/dump-all-vars.md

@@ -10,16 +10,16 @@ tags:
 
 Here is the task to use in order to achieve that :
 
-{{< highlight yaml >}}
+```yaml
 - name: Dump all vars
   action: template src=dumpall.j2 dest=ansible.all
-{{< /highlight >}}
+```
 
 ## Associated template
 
 And here is the template to use with it :
 
-{{< highlight jinja >}}
+```jinja
 Module Variables ("vars"):
 --------------------------------
 {{ vars | to_nice_json }}
@@ -39,7 +39,7 @@ GROUPS Variables ("groups"):
 HOST Variables ("hostvars"):
 --------------------------------
 {{ hostvars | to_nice_json }}
-{{< /highlight >}}
+```
 
 ## Output
 

content/blog/cfengine/leveraging-yaml.md

@@ -17,7 +17,7 @@ The use case bellow lacks a bit or error control with argument validation, it wi
 
 In `cmdb/hosts/andromeda.yaml` we describe some properties of a host named andromeda:
 
-{{< highlight yaml >}}
+```yaml
 domain: adyxax.org
 host_interface: dummy0
 host_ip: "10.1.0.255"
@@ -35,13 +35,13 @@ tunnels:
         peer: "10.1.0.2"
         remote_host: legend.adyxax.org
         remote_port: 1195
-{{< /highlight >}}
+```
 
 ## Reading the yaml
 
 I am bundling the values in a common bundle, accessible globally. This is one of the first bundles processed in the order my policy files are loaded. This is just an extract, you can load multiple files and merge them to distribute common
 settings :
-{{< highlight yaml >}}
+```yaml
 bundle common g
 {
     vars:
@@ -51,14 +51,14 @@ bundle common g
         any::
             "has_host_data" expression => fileexists("$(sys.inputdir)/cmdb/hosts/$(sys.host).yaml");
 }
-{{< /highlight >}}
+```
 
 ## Using the data
 
 ### Cfengine agent bundle
 
 We access the data using the global g.host_data variable, here is a complete example :
-{{< highlight yaml >}}
+```yaml
 bundle agent openvpn
 {
     vars:
@@ -117,12 +117,12 @@ bundle agent openvpn_tunnel(tunnel)
             "$(this.bundle): $(tunnel).conf repaired" ifvarclass => "openvpn_$(tunnel)_conf_repaired";
             "$(this.bundle): $(tunnel) service repaired" ifvarclass => "tunnel_$(tunnel)_service_repaired";
 }
-{{< /highlight >}}
+```
 
 ### Template file
 
 Templates can reference the g.host_data too, like in the following :
-{{< highlight cfg >}}
+```cfg
 [%CFEngine BEGIN %]
 proto udp
 port $(g.host_data[tunnels][$(openvpn_tunnel.tunnel)][port])
@@ -152,7 +152,7 @@ group nogroup
 remote $(g.host_data[tunnels][$(openvpn_tunnel.tunnel)][remote_host]) $(g.host_data[tunnels][$(openvpn_tunnel.tunnel)][remote_port])
 
 [%CFEngine END %]
-{{< /highlight >}}
+```
 
 ## References
 - https://docs.cfengine.com/docs/master/examples-tutorials-json-yaml-support-in-cfengine.html

content/blog/commands/asterisk-call-you.md

@@ -8,6 +8,6 @@ tags:
 
 ## Using the cli
 
-{{< highlight yaml >}}
+```sh
 watch -d -n1 'asterisk -rx “core show channels”'
-{{< /highlight >}}
+```

content/blog/commands/asterisk-list-active-calls.md

@@ -11,6 +11,6 @@ tags:
 At alterway we sometimes have DTMF problems that prevent my mobile from joining a conference room. Here is something I use to have asterisk call me
 and place me inside the room :
 
-{{< highlight yaml >}}
+```
 channel originate SIP/numlog/06XXXXXXXX application MeetMe 85224,M,secret
-{{< /highlight >}}
+```

content/blog/commands/busybox-web-server.md

@@ -11,6 +11,6 @@ tags:
 
 If you have been using things like `python -m SimpleHTTPServer` to serve static files in a pinch, here is something even more simple and lightweight to use :
 
-{{< highlight sh >}}
+```sh
 busybox httpd -vfp 80
-{{< /highlight >}}
+```

content/blog/commands/capture-desktop-video.md

@@ -10,6 +10,6 @@ tags:
 
 You can capture a video of your linux desktop very easily with ffmpeg :
 
-{{< highlight sh >}}
+```sh
 ffmpeg -f x11grab -s xga -r 25 -i :0.0 -sameq /tmp/out.mpg
-{{< /highlight >}}
+```

content/blog/commands/clean-conntrack-states.md

@@ -10,10 +10,10 @@ tags:
 
 Firewalling on linux is messy, here is an example of how to clean conntrack states that match a specific query on a linux firewall :
 
-{{< highlight sh >}}
+```sh
 conntrack -L conntrack -p tcp –orig-dport 65372 | \
 while read _ _ _ _ src dst sport dport _; do
     conntrack -D conntrack –proto tcp –orig-src ${src#*=} –orig-dst ${dst#*=} \
               –sport ${sport#*=} –dport ${dport#*=}
  done
-{{< /highlight >}}
+```

content/blog/commands/date.md

@@ -10,7 +10,7 @@ tags:
 
 I somehow have a hard time remembering this simple date flags *(probably because I rarely get to practice it), I decided to write it down here :
 
-{{< highlight sh >}}
+```sh
 $ date -d @1294319676
 Thu Jan 6 13:14:36 GMT 2011
-{{< /highlight >}}
+```

content/blog/commands/find-hardlinks.md

@@ -10,6 +10,6 @@ tags:
 
 ## The command
 
-{{< highlight sh >}}
+```sh
 find . -samefile /path/to/file
-{{< /highlight >}}
+```

content/blog/commands/find-inodes-used.md

@@ -10,6 +10,6 @@ tags:
 
 ## The command
 
-{{< highlight sh >}}
+```sh
 find . -xdev -printf '%h\n' | sort | uniq -c | sort -k 1 -n
-{{< /highlight >}}
+```

content/blog/commands/git-import-commits.md

@@ -9,6 +9,6 @@ tags:
 ## The trick
 
 In an ideal world there should never be a need to do this, but here is how to do it properly if you ever walk into this bizarre problem. This command imports commits from a repo in the `../masterfiles` folder and applies them to the repository inside the current folder :
-{{< highlight sh >}}
+```sh
 (cd ../masterfiles/; git format-patch –stdout origin/master) | git am
-{{< /highlight >}}
+```

content/blog/commands/git-rewrite-commit-history.md

@@ -9,6 +9,6 @@ tags:
 ## git filter-branch
 
 Here is how to rewrite a git commit history, for example to remove a file :
-{{< highlight sh >}}
+```sh
 git filter-branch –index-filter "git rm --cached --ignore-unmatch ${file}" --prune-empty --tag-name-filter cat - -all
-{{< /highlight >}}
+```

content/blog/commands/ipmi.md

@@ -11,9 +11,9 @@ tags:
 - launch ipmi remote text console : `ipmitool -H XX.XX.XX.XX -C3 -I lanplus -U <ipmi_user> sol activate`
 - Show local ipmi lan configuration : `ipmitool lan print`
 - Update local ipmi lan configuration :
-{{< highlight sh >}}
+```sh
 ipmitool lan set 1 ipsrc static
 ipmitool lan set 1 ipaddr 10.31.149.39
 ipmitool lan set 1 netmask 255.255.255.0
 mc reset cold
-{{< /highlight >}}
+```

content/blog/commands/mdadm.md

@@ -9,34 +9,34 @@ tags:
 
 ## Watch the array status
 
-{{< highlight sh >}}
+```sh
 watch -d -n10 mdadm --detail /dev/md127
-{{< /highlight >}}
+```
 
 ## Recovery from livecd
 
-{{< highlight sh >}}
+```sh
 mdadm --examine --scan >> /etc/mdadm.conf
 mdadm --assemble --scan /dev/md/root
 mount /dev/md127 /mnt  # or vgscan...
-{{< /highlight >}}
+```
 
 If auto detection does not work, you can still assemble an array manually :
-{{< highlight sh >}}
+```sh
 mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 
-{{< /highlight >}}
+```
 
 ## Resync an array
 
 First rigorously check the output of `cat /proc/mdstat`
-{{< highlight sh >}}
+```sh
 mdadm --manage --re-add /dev/md0 /dev/sdb1
-{{< /highlight >}}
+```
 
 ## Destroy an array
 
-{{< highlight sh >}}
+```sh
 mdadm --stop /dev/md0
 mdadm --zero-superblock /dev/sda
 mdadm --zero-superblock /dev/sdb
-{{< /highlight >}}
+```

content/blog/commands/omreport.md

@@ -12,8 +12,8 @@ tags:
 
 ## Other commands
 
-{{< highlight sh >}}
+```sh
 omreport storage vdisk
 omreport storage pdisk controller=0 vdisk=0
 omreport storage pdisk controller=0 pdisk=0:0:4
-{{< /highlight >}}
+```

content/blog/commands/qemu-nbd.md

@@ -9,11 +9,11 @@ tags:
 
 ## Usage example
 
-{{< highlight sh >}}
+```sh
 modprobe nbd max_part=8
 qemu-nbd -c /dev/nbd0 image.img
 mount /dev/nbd0p1 /mnt   # or vgscan && vgchange -ay
 [...]
 umount /mnt
 qemu-nbd -d /dev/nbd0
-{{< /highlight >}}
+```

content/blog/commands/qemu.md

@@ -10,23 +10,23 @@ tags:
 ## Quickly launch a qemu vm with local qcow as hard drive
 
 In this example I am using the docker0 bridge because I do not want to have to modify my shorewall config, but any proper bridge would do : 
-{{< highlight sh >}}
+```sh
 ip tuntap add tap0 mode tap
 brctl addif docker0 tap0
 qemu-img create -f qcow2 obsd.qcow2 10G
 qemu-system-x86_64 -curses -drive file=install65.fs,format=raw -drive file=obsd.qcow2 \
   -net nic,model=virtio,macaddr=00:00:00:00:00:01 -net tap,ifname=tap0
 qemu-system-x86_64 -curses -drive file=obsd.qcow2 -net nic,model=virtio,macaddr=00:00:00:00:00:01 -net tap,ifname=tap0
-{{< /highlight >}}
+```
 
 The first qemu command runs the installer, the second one just runs the vm.
 
 ## Launch a qemu vm with your local hard drive
 
 My use case for this is to install openbsd on a server from a hosting provider that doesn't provide an openbsd installer : 
-{{< highlight sh >}}
+```sh
 qemu-system-x86_64 -curses -drive file=miniroot65.fs -drive file=/dev/sda -net nic -net user
-{{< /highlight >}}
+```
 
 ## Ressources
 

content/blog/commands/rrdtool.md

@@ -8,13 +8,13 @@ tags:
 
 ## Graph manually
 
-{{< highlight sh >}}
+```sh
 for i in `ls`; do
     rrdtool graph $i.png -w 1024 -h 768 -a PNG --slope-mode --font DEFAULT:7: \
       --start -3days --end now DEF:in=$i:netin:MAX DEF:out=$i:netout:MAX \
       LINE1:in#0000FF:"in" LINE1:out#00FF00:"out"
 done
-{{< /highlight >}}
+```
 
 ## References
 

content/blog/debian/error-during-signature-verification.md

@@ -9,9 +9,9 @@ tags:
 ## How to fix
 
 Here is how to fix the apt-get “Error occured during the signature verification” :
-{{< highlight sh >}}
+```sh
 cd /var/lib/apt
 mv lists lists.old
 mkdir -p lists/partial
 aptitude update
-{{< /highlight >}}
+```

content/blog/debian/force-package-removal.md

@@ -9,8 +9,8 @@ tags:
 ## How to force the removal of a package
 
 Here is how to force package removal when post-uninstall script fails :
-{{< highlight sh >}}
+```sh
 dpkg --purge --force-all <package>
-{{< /highlight >}}
+```
 
 There is another option if you need to be smarter or if it is a pre-uninstall script that fails. Look at `/var/lib/dpkg/info/<package>.*inst`, locate the line that fails, comment it out and try to purge again. Repeat until success!

content/blog/debian/no-public-key-error.md

@@ -9,6 +9,6 @@ tags:
 ## How to fix
 
 Here is how to fix the no public key available error :
-{{< highlight sh >}}
+```sh
 apt-key adv --keyserver keyserver.ubuntu.com --recv-keys KEYID
-{{< /highlight >}}
+```

content/blog/docker/cleaning.md

@@ -9,6 +9,6 @@ tags:
 ## The command
 
 Be careful that this will delete any stopped container and remove any locally unused images, volumes and tags :
-{{< highlight sh >}}
+```sh
 docker system prune -f -a
-{{< /highlight >}}
+```

content/blog/docker/docker-compose-bridge.md

@@ -14,7 +14,7 @@ By default, docker-compose will create a network with a randomly named bridge. I
 
 For example if your bridge is named docbr1, you need to put your services in `network_mode: “bridge”` and add a custom `network` entry like :
 
-{{< highlight yaml >}}
+```yaml
 version: '3.0'
 
 services:
@@ -32,4 +32,4 @@ networks:
   default:
     external:
       name: docbr1
-{{< /highlight >}}
+```

content/blog/docker/migrate-data-volume.md

@@ -9,9 +9,9 @@ tags:
 ## The command
 
 Here is how to migrate a data volume between two of your hosts. A rsync of the proper `/var/lib/docker/volumes` subfolder would work just as well, but here is a fun way to do it with docker and pipes :
-{{< highlight sh >}}
+```sh
 export VOLUME=tiddlywiki
 export DEST=10.1.0.242
 docker run --rm -v $VOLUME:/from alpine ash -c "cd /from ; tar -cpf - . " \
 | ssh $DEST "docker run --rm -i -v $VOLUME:/to alpine ash -c 'cd /to ; tar -xfp - ' "
-{{< /highlight >}}
+```

content/blog/docker/shell-usage-in-dockerfile.md

@@ -14,9 +14,9 @@ The default shell is `[“/bin/sh”, “-c”]`, which doesn't handle pipe fail
 
 To process errors when using pipes use this :
 
-{{< highlight sh >}}
+```sh
 SHELL ["/bin/bash", "-eux", "-o", "pipefail", "-c"]
-{{< /highlight >}}
+```
 
 ## References
 

content/blog/freebsd/change-the-ip-address-of-a-running-jail.md

@@ -11,6 +11,6 @@ tags:
 
 Here is how to change the ip address of a running jail :
 
-{{< highlight sh >}}
+```sh
 jail -m ip4.addr=“192.168.1.87,192.168.1.88” jid=1
-{{< /highlight >}}
+```

content/blog/freebsd/clean-install-does-not-boot.md

@@ -10,7 +10,7 @@ tags:
 
 I installed a fresh FreeBSD server today, and to my surprise it refused to boot. I had to do the following from my liveUSB :
 
-{{< highlight yaml >}}
+```sh
 gpart set -a active /dev/ada0
 gpart set -a bootme -i 1 /dev/ada0
-{{< /highlight >}}
+```

content/blog/gentoo/get-zoom-to-work.md

@@ -12,13 +12,13 @@ The zoom video conderencing tool works on gentoo, but since it is not integrated
 
 ## Running the client
 
-{{< highlight yaml >}}
+```sh
 ./ZoomLauncher
-{{< /highlight >}}
+```
 
 ## Working around the "zoommtg address not understood" error
 
 When you try to authenticate you will have your web browser pop up with a link it cannot interpret. You need to get the `zoommtg://.*` thing and run it in another ZoomLauncher (do not close the zoom process that spawned this authentication link or the authentication will fail :
-{{< highlight yaml >}}
+```sh
 ./ZoomLauncher 'zoommtg://zoom.us/google?code=XXXXXXXX'
-{{< /highlight >}}
+```

content/blog/hugo/adding-custom-shortcode-age.md

@@ -14,9 +14,9 @@ On the [about-me]({{< ref "about-me" >}}) page I had hardcoded my age. I wanted
 
 Added a custom markdown shortcode in hugo in as simple as creating a `layouts/shortcodes/` directory. Each html file created inside will define a shortcode from the filename. In my example I want to calculate my age so I named the shortcode `age.html` and added the following simple template code :
 
-{{< highlight html >}}
+```html
 {{ div (sub now.Unix 493473600 ) 31556926 }}
-{{< / highlight >}}
+```
 
 The first number is the timestamp of my birthday, the second represents how many seconds there are in a year.
 
@@ -24,14 +24,14 @@ The first number is the timestamp of my birthday, the second represents how many
 
 With this `layouts/shortcodes/age.html` file I can just add the following in a page to add my age :
 
-{{< highlight html >}}
+```html
 {{< print "{{% age %}}" >}}
-{{< / highlight >}}
+```
 
 And if you are wondering how I am able to display a shortcode code inside this page without having it render, it is because I defined another shortcode that does exactly like this :
-{{< highlight html >}}
+```html
 {{< print "{{ index .Params 0 }}" >}}
-{{< / highlight >}}
+```
 
 You can find these examples [here](https://git.adyxax.org/adyxax/www/tree/layouts/shortcodes)! Hugo really is a powerful static website generator, it is amazing.
 

content/blog/hugo/switching-to-hugo.md

@@ -12,49 +12,49 @@ This is the website you are currently reading. It is a static website built usin
 
 ## Installing hugo
 
-{{< highlight sh >}}
+```sh
 go get github.com/gohugoio/hugo
-{{< / highlight >}}
+```
 
 You probably won't encounter this issue but this command failed at the time I installed hugo because the master branch in one of the dependencies was
 tainted. I fixed it with by using a stable tag for this project and continue installing hugo from there:
-{{< highlight sh >}}
+```sh
 cd go/src/github.com/tdewolff/minify/
 tig --all
 git checkout v2.6.1
 go get github.com/gohugoio/hugo
-{{< / highlight >}}
+```
 
 This did not build me the extended version of hugo that I need for the [docsy](https://github.com/google/docsy) theme I chose, so I had to get it by doing :
-{{< highlight sh >}}
+```sh
 cd ~/go/src/github.com/gohugoio/hugo/
 go get --tags extended
 go install --tags extended
-{{< / highlight >}}
+```
 
 ## Bootstraping this site
 
-{{< highlight sh >}}
+```sh
 hugo new site www
 cd www
 git init
 git submodule add https://github.com/google/docsy themes/docsy
-{{< / highlight >}}
+```
 
 The docsy theme requires two nodejs programs to run :
-{{< highlight sh >}}
+```sh
 npm install -D --save autoprefixer
 npm install -D --save postcss-cli
-{{< / highlight >}}
+```
 
 ## hugo commands
 
 To spin up the live server for automatic rebuilding the website when writing articles :
-{{< highlight sh >}}
+```sh
 hugo server --bind 0.0.0.0 --minify --disableFastRender
-{{< / highlight >}}
+```
 
 To publish the website in the `public` folder :
-{{< highlight sh >}}
+```sh
 hugo --minify
-{{< / highlight >}}
+```

content/blog/kubernetes/get_key_and_certificae.md

@@ -14,7 +14,7 @@ My use case is to deploy a wildcard certificate that was previously handled by a
 ## The solution
 
 Assuming we are working with a secret named `wild.adyxax.org-cert` and our namespace is named `legacy` :
-{{< highlight sh >}}
+```sh
 kubectl -n legacy get secret wild.adyxax.org-cert -o json -o=jsonpath="{.data.tls\.crt}" | base64 -d > fullchain.cer
 kubectl -n legacy get secret wild.adyxax.org-cert -o json -o=jsonpath="{.data.tls\.key}" | base64 -d > adyxax.org.key
-{{< /highlight >}}
+```

content/blog/kubernetes/pg_dump_restore.md

@@ -11,21 +11,21 @@ tags:
 ## Dumping
 Assuming we are working with a postgresql statefulset, our namespace is named `miniflux` and our master pod is named `db-postgresql-0`, trying to
 dump a database named `miniflux`:
-{{< highlight sh >}}
+```sh
 export POSTGRES_PASSWORD=$(kubectl get secret --namespace miniflux db-postgresql \
   -o jsonpath="{.data.postgresql-password}" | base64 --decode)
 kubectl run db-postgresql-client --rm --tty -i --restart='Never' --namespace miniflux \
   --image docker.io/bitnami/postgresql:11.8.0-debian-10-r19 --env="PGPASSWORD=$POSTGRES_PASSWORD" \
   --command -- pg_dump --host db-postgresql -U postgres -d miniflux > miniflux.sql-2020062501
-{{< /highlight >}}
+```
 
 ## Restoring
 
 Assuming we are working with a postgresql statefulset, our namespace is named `miniflux` and our master pod is named `db-postgresql-0`, trying to
 restore a database named `miniflux`:
-{{< highlight sh >}}
+```sh
 kubectl -n miniflux cp miniflux.sql-2020062501 db-postgresql-0:/tmp/miniflux.sql
 kubectl -n miniflux exec -ti db-postgresql-0 -- psql -U postgres -d miniflux
 miniflux=# \i /tmp/miniflux.sql
 kubectl -n miniflux exec -ti db-postgresql-0 -- rm /tmp/miniflux.sql
-{{< /highlight >}}
+```

content/blog/kubernetes/single-node-cluster-taint.md

@@ -10,11 +10,11 @@ tags:
 ## The solution
 
 On a single node cluster, control plane nodes are tainted so that the cluster never schedules pods on them. To change that run :
-{{< highlight sh >}}
+```sh
 kubectl taint nodes --all node-role.kubernetes.io/master-
-{{< /highlight >}}
+```
 
 Getting dns in your pods :
-{{< highlight sh >}}
+```sh
 add  --cluster-dns=10.96.0.10 to /etc/conf.d/kubelet
-{{< /highlight >}}
+```

content/blog/miscellaneous/bacula-bareos.md

@@ -13,28 +13,28 @@ Bacula is a backup software, bareos is a fork of it. Here are some tips and solu
 ## Adjust an existing volume for pool configuration changes
 
 In bconsole, run the following commands and follow the prompts :
-{{< highlight sh >}}
+```sh
 update pool from resource
 update all volumes in pool
-{{< /highlight >}}
+```
 
 ## Using bextract
 
 On the sd you need to have a valid device name with the path to your tape, then run :
-{{< highlight sh >}}
+```sh
 bextract -V <volume names separated by |> <device-name>
 <directory-to-store-files>
-{{< /highlight >}}
+```
 
 ## Integer out of range sql error
 
 If you get an sql error `integer out of range` for an insert query in the catalog, check the id sequence for the table which had the error. For
 example with the basefiles table :
-{{< highlight sql >}}
+```sql
 select nextval('basefiles_baseid_seq');
-{{< /highlight >}}
+```
 
 You can then fix it with :
-{{< highlight sql >}}
+```sql
 alter table BaseFiles alter column baseid set data type bigint;
-{{< /highlight >}}
+```

content/blog/miscellaneous/bash-tcp-client.md

@@ -10,8 +10,8 @@ tags:
 
 There are some fun toys in bash. I would not rely on it for a production script, but here is one such things :
 
-{{< highlight sh >}}
+```sh
 exec 5<>/dev/tcp/10.1.0.254/8080
 bash$ echo -e "GET / HTTP/1.0\n" >&5
 bash$ cat <&5
-{{< /highlight >}}
+```

content/blog/miscellaneous/boot-from-initramfs.md

@@ -14,9 +14,9 @@ Sometimes, your linux machine can get stuck while booting and drop you into an i
 
 All initramfs are potentially different, but almost always feature busybox and common mechanisms. Recently I had to finish booting from an initramfs shell, here is how I used `switch_root` to do so :
 
-{{< highlight sh >}}
+```sh
 lvm vgscan
 lvm vgchange -ay vg
 mount -t ext4 /dev/mapper/vg-root /root
 exec switch_root -c /dev/console /root /sbin/init
-{{< /highlight >}}
+```

content/blog/miscellaneous/etc-update-alpine.md

@@ -10,7 +10,7 @@ tags:
 ## The script
 
 Alpine linux doesn't seem to have a tool to merge pending configuration changes, so I wrote one :
-{{< highlight sh >}}
+```sh
 #!/bin/sh
 set -eu
  
@@ -37,4 +37,4 @@ for new_file in $(find /etc -iname '*.apk-new'); do
         esac
     done
 done
-{{< /highlight >}}
+```

content/blog/miscellaneous/i3dropdown.md

@@ -14,21 +14,21 @@ i3dropdown is a tool to make any X application drop down from the top of the scr
 ## Compilation
 
 First of all, you have get i3dropdown and compile it. It does not have any dependencies so it is really easy :
-{{< highlight sh >}}
+```sh
 git clone https://gitlab.com/exrok/i3dropdown
 cd i3dropdown
 make
 cp build/i3dropdown ~/bin/
-{{< /highlight >}}
+```
 
 ## i3 configuration
 
 Here is a working example of the pavucontrol app, a volume mixer I use :
-{{< highlight conf >}}
+```cfg
 exec --no-startup-id i3 --get-socketpath > /tmp/i3wm-socket-path
 for_window [instance="^pavucontrol"] floating enable
 bindsym Mod4+shift+p exec /home/julien/bin/i3dropdown -W 90 -H 50 pavucontrol pavucontrol-qt
-{{< /highlight >}}
+```
 
 To work properly, i3dropdown needs to have the path to the i3 socket. Because the command to get the socketpath from i3 is a little slow, it is best to cache it somewhere. By default
 i3dropdown recognises `/tmp/i3wm-socket-path`. Then each window managed by i3dropdown needs to be floating. The last line bind a key to invoke or mask the app.

content/blog/miscellaneous/link-deleted-inode.md

@@ -15,8 +15,8 @@ Sometimes a file gets deleted by mistake, but thankfully it is still opened by s
 
 Get the inode number from `lsof` (or from `fstat` if you are on a modern system), then run something like the following :
 
-{{< highlight sh >}}
+```sh
 debugfs -w /dev/mapper/vg-home -R 'link <16008> /some/path'
-{{< /highlight >}}
+```
 
 In this example 16008 is the inode number you want to link to (the < > are important, they tell debugfs you are manipulating an inode). Beware that **the path is relative to the root of the block device** you are restoring onto.

content/blog/miscellaneous/mencoder.md

@@ -9,14 +9,14 @@ tags:
 ## Aggregate png images into a video
 
 Example command :
-{{< highlight sh >}}
+```sh
 mencoder mf://*.png -mf w=1400:h=700:fps=1:type=png -ovc lavc -lavcopts vcodec=mpeg4:mbd=2:trell -oac copy -o output.avi
-{{< /highlight >}}
+```
 
 You should use the following to specify a list of files instead of `*.png`:
-{{< highlight sh >}}
+```sh
 mf://@list.txt
-{{< /highlight >}}
+```
 
 ## References
 

content/blog/miscellaneous/mirroring-to-github.md

@@ -16,13 +16,13 @@ It turns out it is quite simple. First you will need to generate a [github acces
 
 Then you create a git hook with a script that looks like the following :
 
-{{< highlight sh >}}
+```sh
 #!/usr/bin/env bash
 set -eu
 
 git push --mirror --quiet https://adyxax:TOKEN@github.com/adyxax/www.git &> /dev/null
 echo 'github updated'
-{{< /highlight >}}
+```
 
 Just put your token there, adjust your username and the repository path then it will work. I am using this in `post-receive` hooks on my git server on several repositories without any issue.
 

content/blog/miscellaneous/mssql-centos-7.md

@@ -15,7 +15,7 @@ I had to do this in order to help a friend, I do not think I would ever willingl
 ## Procedure
 
 Here is how to setup mssql on a fresh centos 7
-{{< highlight sh >}}
+```sh
 vi /etc/sysconfig/network-scripts/ifcfg-eth0
 vi /etc/resolv.conf
 curl -o /etc/yum.repos.d/mssql-server.repo https://packages.microsoft.com/config/rhel/7/mssql-server-2017.repo
@@ -34,4 +34,4 @@ passwd
 rm -f /etc/localtime
 ln -s /usr/share/zoneinfo/Europe/Paris /etc/localtime
 /opt/mssql-tools/bin/sqlcmd -S localhost -U SA -p
-{{< /highlight >}}
+```

content/blog/miscellaneous/my-postgresql-role-cannot-login.md

@@ -13,6 +13,6 @@ Login is a permission on postgresql, that sometimes is not obvious it can cause
 ## The solution
 
 Simply log in as postgres or another administrator account and run :
-{{< highlight sh >}}
+```sh
 ALTER ROLE "user" LOGIN;
-{{< /highlight >}}
+```

content/blog/miscellaneous/nginx-ldap.md

@@ -8,7 +8,7 @@ tags:
 
 ## How to
 
-{{< highlight nginx >}}
+```nginx
 ldap_server ldap {
     auth_ldap_cache_enabled on;
     auth_ldap_cache_expiration_time 10000;
@@ -23,4 +23,4 @@ ldap_server ldap {
     require valid_user;
     #require group "cn=admins,ou=groups,dc=adyxax,dc=org";
 }
-{{< /highlight >}}
+```

content/blog/miscellaneous/nginx-rewrite-break-last.md

@@ -13,7 +13,7 @@ Today I was called in escalation to debug why a set of rewrites was suddenly mis
 ## Outside a location block
 
 When used outside a location block, these keywords stop the rules evaluation and then evaluate to a location. Consider the following example :
-{{< highlight nginx >}}
+```nginx
 server {
 	[...]
 	location / {
@@ -28,11 +28,11 @@ server {
 	rewrite ([^/]+\.txt)$ /texts/$1 last;
 	rewrite ([^/]+\.cfg)$ /configs/$1 break;
 }
-{{< /highlight >}}
+```
 
 If you run several curls you can see the behaviour illustrated :
 
-{{< highlight sh >}}
+```sh
 curl http://localhost/test
 root   # we hit the root handler without any redirect matching
 
@@ -41,14 +41,14 @@ texts  # we hit the rewrite to /texts/test.txt, which is then reevaluated and hi
 
 curl http://localhost/test.cfg
 configs  # we hit the rewrite to /configs/test.cfg, which is then reevaluated and hits the configs location
-{{< /highlight >}}
+```
 
 ## Inside a location block
 
 When used inside a location block a rewrite rule flagged last will eventually trigger a location change (it is reevaluated based on the new url) but this does not happen when break is used.
 
 Consider the following example :
-{{< highlight nginx >}}
+```nginx
 server {
 	[...]
 	location / {
@@ -63,11 +63,11 @@ server {
 		return 200 'configs';
 	}
 }
-{{< /highlight >}}
+```
 
 If you run several curls you can see the behaviour illustrated :
 
-{{< highlight sh >}}
+```sh
 curl http://localhost/test
 root   # we hit the root handler without any redirect matching
 
@@ -76,7 +76,7 @@ texts  # we hit the rewrite to /texts/test.txt, which is then reevaluated and hi
 
 curl http://localhost/test.cfg
 404 NOT FOUND     # or maybe a file if you had a test.cfg file in your root directory!
-{{< /highlight >}}
+```
 
 Can you see what happened for the last test? The break statement in a location stops all evaluation, and do not reevaluate the resulting path in any location. Nginx therefore tries to serve a file from the root directory specified for the server. That is the reason we do not get either `root` or `configs` as outputs.
 

content/blog/miscellaneous/osm-overlay-example.md

@@ -13,7 +13,7 @@ OpenStreetMap is a great resource and there is a lot more information stored the
 ## The solution
 
 Go to http://overpass-turbo.eu/ and enter a filter script similar to the following :
-{{< highlight html >}}
+```html
 <osm-script>
   <query type="node">
     <has-kv k="amenity" v="recycling"/>
@@ -22,6 +22,6 @@ Go to http://overpass-turbo.eu/ and enter a filter script similar to the followi
   <!-- print results -->
   <print mode="body"/>
 </osm-script>
-{{< /highlight >}}
+```
 
 This example will highlight the recycling points near a target location. From there you can build almost any filter you can think of!

content/blog/miscellaneous/pleroma.md

@@ -12,7 +12,7 @@ This article is about my installation of pleroma in a standard alpine linux lxd
 
 ## Installation notes
 
-{{< highlight sh >}}
+```sh
 apk add elixir nginx postgresql postgresql-contrib git sudo erlang-ssl erlang-xmerl erlang-parsetools \
   erlang-runtime-tools make gcc build-base vim vimdiff htop curl
 /etc/init.d/postgresql start
@@ -24,10 +24,10 @@ mix deps.get
 mix generate_config
 cp config/generated_config.exs config/prod.secret.exs
 cat config/setup_db.psql
-{{< /highlight >}}
+```
 
 At this stage you are supposed to execute these setup_db commands in your postgres. Instead of chmoding and stuff detailed in the official documentation I execute it manually from psql shell :
-{{< highlight sh >}}
+```sh
 su - postgres
 psql
 CREATE USER pleroma WITH ENCRYPTED PASSWORD 'XXXXXXXXXXXXXXXXXXX';
@@ -35,21 +35,21 @@ CREATE DATABASE pleroma_dev OWNER pleroma;
 \c pleroma_dev;
 CREATE EXTENSION IF NOT EXISTS citext;
 CREATE EXTENSION IF NOT EXISTS pg_trgm;
-{{< /highlight >}}
+```
 
 Now back to pleroma :
-{{< highlight sh >}}
+```sh
 MIX_ENV=prod mix ecto.migrate
 MIX_ENV=prod mix phx.server
-{{< /highlight >}}
+```
 
 If this last command runs without error your pleroma will be available and you can test it with : 
-{{< highlight sh >}}
+```sh
 curl http://localhost:4000/api/v1/instance
-{{< /highlight >}}
+```
 
 If this works, you can shut it down with two C-c and we can configure nginx. This article doesn't really cover my setup since my nginx doesn't run there, and I am using letsencrypt wildcard certificates fetched somewhere else unrelated, so to simplify I only paste the vhost part of the configuration :
-{{< highlight sh >}}
+```sh
 ### in nginx.conf inside the container ###
 # {{{ pleroma
 proxy_cache_path /tmp/pleroma-media-cache levels=1:2 keys_zone=pleroma_media_cache:10m max_size=500m
@@ -96,10 +96,10 @@ location /proxy {
 }
 
 client_max_body_size 20M;
-{{< /highlight >}}
+```
 
 Now add the phx.server on boot. I run pleroma has plemora user to completely limit the permissions of the server software. The official documentation has all files belong to the user running the server, I prefer that only the uploads directory does. Since I don't run nginx from this container I also edit this out :
-{{< highlight sh >}}
+```sh
 adduser -s /sbin/nologin -D -h /srv/pleroma pleroma
 cp -a /root/.hex/ /srv/pleroma/.
 cp -a /root/.mix /srv/pleroma/.
@@ -110,12 +110,12 @@ sed -i /etc/init.d/pleroma -e '/^command_user=/s/=.*/=nobody:nobody/'
 sed -i /etc/init.d/pleroma -e 's/nginx //'
 rc-update add pleroma default
 rc-update add pleroma start
-{{< /highlight >}}
+```
 
 You should be good to go and access your instance from any web browser. After creating your account in a web browser come back to the cli and set yourself as moderator : 
-{{< highlight sh >}}
+```sh
 mix set_moderator adyxax
-{{< /highlight >}}
+```
 
 ## References
 

content/blog/miscellaneous/postgresql-read-only.md

@@ -9,10 +9,10 @@ tags:
 ## The solution
 
 Here is the bare minimum a user need in order to have complete read only access on a postgresql database :
-{{< highlight sh >}}
+```sh
 GRANT CONNECT ON DATABASE "db" TO "user";
 \c db
 GRANT USAGE ON SCHEMA public TO "user";
 GRANT SELECT ON ALL TABLES IN SCHEMA public TO "user";
 ALTER DEFAULT PRIVILEGES IN SCHEMA public GRANT SELECT ON TABLES TO "user";
-{{< /highlight >}}
+```

content/blog/miscellaneous/postgresql-reassign.md

@@ -9,13 +9,13 @@ tags:
 ## The solution
 
 Here is the sequence of commande that will change the owner of all objects in a database from a user named "support" to another named "test-support":
-{{< highlight sh >}}
+```sql
 ALTER DATABASE name OWNER TO new_owner
 for tbl in `psql -qAt -c "select tablename from pg_tables where schemaname = 'public';" YOUR_DB` ; do psql -c "alter table $tbl owner to NEW_OWNER" YOUR_DB ; done
 for tbl in `psql -qAt -c "select sequence_name from information_schema.sequences where sequence_schema = 'public';" YOUR_DB` ; do  psql -c "alter table $tbl owner to NEW_OWNER" YOUR_DB ; done
 for tbl in `psql -qAt -c "select table_name from information_schema.views where table_schema = 'public';" YOUR_DB` ; do  psql -c "alter table $tbl owner to NEW_OWNER" YOUR_DB ; done
-{{< /highlight >}}
+```
 
-{{< highlight sh >}}
+```sql
 reassign owned by "support" to "test-support";
-{{< /highlight >}}
+```

content/blog/miscellaneous/purge-postfix-queue-based-content.md

@@ -13,6 +13,6 @@ Sometimes a lot of spam can acacumulate in a postfix queue.
 ## The solution
 
 Here is a command that can search through queued emails for a certain character string (here XXX as an example) and delete the ones that contain it :
-{{< highlight sh >}}
+```sh
 find /var/spool/postfix/deferred/ -type f -exec grep -li 'XXX' '{}' \; | xargs -n1 basename | xargs -n1 postsuper -d
-{{< /highlight >}}
+```

content/blog/miscellaneous/reusing-ssh-connections.md

@@ -13,7 +13,7 @@ It is possible to share multiple sessions over a single connection. One of the a
 ## How to
 
 You need a directory to store the sockets for the opened sessions, I use the `~/.ssh/tmp` directory for it. Whatever you choose, make sure it exists by running `mkdir` now. Then add these two lines at the start of your `~/.ssh/config` :
-{{< highlight sh >}}
+```cfg
 ControlMaster auto
 ControlPath   ~/.ssh/tmp/%h_%p_%r
-{{< /highlight >}}
+```

content/blog/miscellaneous/rocketchat.md

@@ -14,11 +14,11 @@ I needed to test some scripts that interact with a rocketchat instance at work.
 ## The commands
 
 Docker simple install :
-{{< highlight sh >}}
+```sh
 docker run --name db -d mongo --smallfiles --replSet hurricane
 
 docker exec -ti db mongo
 > rs.initiate()
 
 docker run -p 3000:3000 --name rocketchat --env ROOT_URL=http://hurricane --env MONGO_OPLOG_URL=mongodb://db:27017/local?replSet=hurricane  --link db -d rocket.chat
-{{< /highlight >}}
+```

content/blog/miscellaneous/screen-cannot-open-terminal.md

@@ -11,15 +11,15 @@ tags:
 ## The problem
 
 At my current workplace there are die hard screen fanatics that refuse to upgrade to tmux. Sometimes I get the following error :
-{{< highlight sh >}}
+```sh
 Cannot open your terminal '/dev/pts/0' - please check.
-{{< /highlight >}}
+```
 
 ## The solution
 
 This error means that you did not open the shell with the user you logged in with. You can make screen happy by running : 
-{{< highlight sh >}}
+```sh
 script /dev/null
-{{< /highlight >}}
+```
 
 In this new environment your screen commands will work normally.

content/blog/miscellaneous/seti-at-home.md

@@ -13,7 +13,7 @@ Me and some friends were feeling nostalgics of running Seti@Home as a screensave
 
 ## The commands
 
-{{< highlight sh >}}
+```sh
 apt install boinc
 echo "graou" > /var/lib/boinc-client/gui_rpc_auth.cfg
 systemctl restart boinc-client
@@ -21,4 +21,4 @@ boinccmd --host localhost --passwd graou --get_messages 0
 boinccmd --host localhost --passwd graou --get_state|less
 boinccmd --host localhost --passwd graou --lookup_account http://setiathome.berkeley.edu <EMAIL> XXXXXX
 boinccmd --host localhost --passwd graou --project_attach http://setiathome.berkeley.edu <ACCOUNT_KEY>
-{{< /highlight >}}
+```

content/blog/miscellaneous/sqlite-pretty-print.md

@@ -8,9 +8,9 @@ tags:
 
 ## The solution
 In `~/.sqliterc` add the following :
-{{< highlight sh >}}
+```cfg
 .mode column
 .headers on
 .separator ROW "\n"
 .nullvalue NULL
-{{< /highlight >}}
+```

content/blog/miscellaneous/tc.md

@@ -8,14 +8,14 @@ tags:
 
 ## How to
 
-{{< highlight sh >}}
+```sh
 tc qdisc show dev eth0
 tc qdisc add dev eth0 root netem delay 200ms
 tc qdisc show dev eth0
 
 tc qdisc delete dev eth0 root netem delay 200ms
 tc qdisc show dev eth0
-{{< /highlight >}}
+```
 
 ## References
 

content/blog/netapp/investigate-memory-errors.md

@@ -8,7 +8,7 @@ tags:
 
 ## The commands
 
-{{< highlight sh >}}
+```sh
 set adv
 system node show-memory-errors -node <cluster_node>
-{{< / highlight >}}
+```

content/docs/adyxax.org/nethack.md

@@ -11,46 +11,46 @@ I am hosting a private nethack game server accessible via ssh for anyone who wil
 
 TODO
 
-{{< highlight sh >}}
+```sh
 groupadd -r games
 useradd -r -g games nethack
 git clone 
-{{< /highlight >}}
+```
 
 ## nethack
 
 TODO
 
-{{< highlight sh >}}
+```sh
-{{< /highlight >}}
+```
 
 ## scores script
 
 TODO
 
-{{< highlight sh >}}
+```sh
-{{< /highlight >}}
+```
 
 ## copying shared libraries
 
-{{< highlight sh >}}
+```sh
 cd /opt/nethack
 for i in `ls bin`; do for l in `ldd bin/$i | tail -n +1 | cut -d'>' -f2 | awk '{print $1}'`; do if [ -f $l ]; then echo $l; cp $l lib64/; fi; done; done
 for l in `ldd dgamelaunch | tail -n +1 | cut -d'>' -f2 | awk '{print $1}'`; do if [ -f $l ]; then echo $l; cp $l lib64/; fi; done
 for l in `ldd nethack-3.7.0-r1/games/nethack | tail -n +1 | cut -d'>' -f2 | awk '{print $1}'`; do if [ -f $l ]; then echo $l; cp $l lib64/; fi; done
-{{< /highlight >}}
+```
 
 ## making device nodes
 
 TODO! For now I mount all of /dev in the chroot :
-{{< highlight sh >}}
+```sh
 #mknod -m 666 dev/ptmx c 5 2
 mount -R /dev /opt/nethack/dev
-{{< /highlight >}}
+```
 
 ## debugging
 
-{{< highlight sh >}}
+```sh
 gdb chroot
 run --userspec=nethack:games /opt/nethack/ /dgamelaunch
-{{< /highlight >}}
+```

content/docs/gentoo/installation.md

@@ -16,10 +16,10 @@ You can get a bootable iso or liveusb from https://www.gentoo.org/downloads/. I
 
 Once you boot on the installation media, you can start sshd and set a temporary password and proceed with the installation more confortably from another machine :
 
-{{< highlight sh >}}
+```sh
 /etc/init.d/sshd start
 passwd
-{{< /highlight >}}
+```
 
 Don't forget to either run `dhcpcd` or manually set an ip and gateway to the machine.
 
@@ -27,7 +27,7 @@ Don't forget to either run `dhcpcd` or manually set an ip and gateway to the mac
 
 There are several options depending on wether you need soft raid, full disk encryption or a simple root device with no additional complications. It will also differ if you are using a virtual machine or a physical one.
 
-{{< highlight sh >}}
+```sh
 tmux
 blkdiscard /dev/nvme0n1
 sgdisk -n1:0:+2M -t1:EF02 /dev/nvme0n1
@@ -37,7 +37,7 @@ mkfs.fat -F 32 -n efi-boot /dev/nvme0n1p2
 mkfs.xfs /dev/nvme0n1p3
 mount /dev/sda3 /mnt/gentoo
 cd /mnt/gentoo
-{{< /highlight >}}
+```
 
 Make sure you do not repeat the mistake I too often make by mounting something to /mnt while using the liveusb/livecd. You will lose your shell if you do this and will need to reboot!
 
@@ -46,109 +46,109 @@ Make sure you do not repeat the mistake I too often make by mounting something t
 Get the stage 3 installation file from https://www.gentoo.org/downloads/. I personnaly use the non-multilib one from the advanced choices, since I am no longer using and 32bits software except steam, and I use steam from a multilib chroot.
 
 Put the archive on the server in /mnt/gentoo (you can simply wget it from there), then extract it :
-{{< highlight sh >}}
+```sh
 tar xpf stage3-*.tar.xz --xattrs-include='*.*' --numeric-owner
 mount /dev/nvme0n1p2 boot
 mount -R /proc proc
 mount -R /sys sys
 mount -R /dev dev
 chroot .
-{{< /highlight >}}
+```
 
 ## Initial configuration
 
 We prepare the local language of the system :
-{{< highlight sh >}}
+```sh
 echo 'LANG="en_US.utf8"' > /etc/env.d/02locale
 echo 'en_US.UTF-8 UTF-8' >> /etc/locale.gen
 locale-gen
 env-update && source /etc/profile
 echo 'nameserver 1.1.1.1' > /etc/resolv.conf
-{{< /highlight >}}
+```
 
 We set a loop device to hold the portage tree. It will be formatted with optimisation for the many small files that compose it :
-{{< highlight sh >}}
+```sh
 mkdir -p /srv/gentoo-distfiles
 truncate -s 10G /portage.img
 mke2fs  -b 1024 -i 2048 -m 0 -O "dir_index" -F /portage.img
 tune2fs -c 0 -i 0 /portage.img
 mkdir /usr/portage
 mount -o loop,noatime,nodev /portage.img /usr/portage/
-{{< /highlight >}}
+```
 
 We set default compilation options and flags. If you are not me and cannot rsync this location, you can browse it from https://packages.adyxax.org/x86-64/etc/portage/ :
-{{< highlight sh >}}
+```sh
 rsync -a --delete packages.adyxax.org:/srv/gentoo-builder/x86-64/etc/portage/ /etc/portage/
 sed -i /etc/portage/make.conf -e s/buildpkg/getbinpkg/
 echo 'PORTAGE_BINHOST="https://packages.adyxax.org/x86-64/packages/"' >> /etc/portage/make.conf
-{{< /highlight >}}
+```
 
 We get the portage tree and sync the timezone
-{{< highlight sh >}}
+```sh
 emerge --sync
-{{< /highlight >}}
+```
 
 ## Set hostname and timezone
 
-{{< highlight sh >}}
+```sh
 export HOSTNAME=XXXXX
 sed -i /etc/conf.d/hostname -e /hostname=/s/=.*/=\"${HOSTNAME}\"/
 echo "Europe/Paris" > /etc/timezone
 emerge --config sys-libs/timezone-data
-{{< /highlight >}}
+```
 
 ## Check cpu flags and compatibility
 
 TODO
-{{< highlight sh >}}
+```sh
 emerge cpuid2cpuflags -1q
 cpuid2cpuflags
 gcc -### -march=native /usr/include/stdlib.h
-{{< /highlight >}}
+```
 
 ## Rebuild the system
 
-{{< highlight sh >}}
+```sh
 emerge --quiet -e @world
 emerge --quiet dosfstools app-admin/logrotate app-admin/syslog-ng app-portage/gentoolkit \
        dev-vcs/git bird openvpn htop net-analyzer/tcpdump net-misc/bridge-utils \
        sys-apps/i2c-tools sys-apps/pciutils sys-apps/usbutils sys-boot/grub sys-fs/ncdu \
        sys-process/lsof net-vpn/wireguard-tools
 emerge --unmerge nano -q
-{{< /highlight >}}
+```
 
 ## Grab a working kernel
 
 Next we need to Grab a working kernel from our build server along with its modules. If you don't have one already, you have some work to do!
 
 Check the necessary hardware support with :
-{{< highlight sh >}}
+```sh
 i2cdetect -l
 lspci -nnk
 lsusb
-{{< /highlight >}}
+```
 
 TODO specific page with details on how to build required modules like the nas for example.
-{{< highlight sh >}}
+```sh
 emerge gentoo-sources genkernel -q
 ...
-{{< /highlight >}}
+```
 
 ## Final configuration steps
 
 ### fstab
 
-{{< highlight sh >}}
+```sh
 # /etc/fstab: static file system information.
 #
 #<fs>         <mountpoint>  <type>  <opts>              <dump/pass>
 /dev/vda3     /             ext4    noatime,discard     0  1
 /dev/vda2     /boot         vfat    noatime             1  2
 /portage.img  /usr/portage  ext2    noatime,nodev,loop  0  0
-{{< /highlight >}}
+```
 
 ### networking
-{{< highlight sh >}}
+```sh
 echo 'hostname="phoenix"' > /etc/conf.d/hostname
 echo 'dns_domain_lo="adyxax.org"
 config_eth0="192.168.1.3 netmask 255.255.255.0"
@@ -156,7 +156,7 @@ routes_eth0="default via 192.168.1.1"' > /etc/conf.d/net
 cd /etc/init.d
 ln -s net.lo net.eth0
 rc-update add net.eth0 boot
-{{< /highlight >}}
+```
 
 ### Grub
 
@@ -170,28 +170,28 @@ grub-mkconfig -o /boot/grub/grub.cfg
 
 ### /etc/hosts
 
-{{< highlight sh >}}
+```sh
 scp root@collab-jde.nexen.net:/etc/hosts /etc/
-{{< /highlight >}}
+```
 
 ### root account access
 
-{{< highlight sh >}}
+```sh
 mkdir -p /root/.ssh
 echo ' ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAILOJV391WFRYgCVA2plFB8W8sF9LfbzXZOrxqaOrrwco  hurricane' > /root/.ssh/authorized_keys
 passwd
-{{< /highlight >}}
+```
 
 ### Add necessary daemons on boot
-{{< highlight sh >}}
+```sh
 rc-update add syslog-ng default
 rc-update add cronie default
 rc-update add sshd default
-{{< /highlight >}}
+```
 
 ## TODO
 
-{{< highlight sh >}}
+```sh
 net-firewall/shorewall
 ...
 rc-update add shorewall default
@@ -216,7 +216,7 @@ rc-update add docker default
 
 app-emulation/lxd
 rc-update add lxd default
-{{< /highlight >}}
+```
 
 ## References
 

content/docs/gentoo/kernel_upgrades.md

@@ -9,18 +9,18 @@ tags:
 ## Introduction
 
 Now that I am mostly running OpenBSD servers I just use genkernel to build my custom configuration on each node with :
-{{< highlight sh >}}
+```sh
 eselect kernel list
 eselect kernel set 1
 genkernel all  --kernel-config=/proc/config.gz --menuconfig
 nvim --diff /proc/config.gz /usr/src/linux/.config
-{{< / highlight >}}
+```
 
 Bellow you will find how I did things previously when centralising the build of all kernels on a collab-jde machine, and distributing them all afterwards. Local nodes would only rebuild local modules and get on with their lives.
 
 ## Building on collab-jde
 
-{{< highlight sh >}}
+```sh
 PREV_VERSION=4.14.78-gentoo
 eselect kernel list
 eselect kernel set 1
@@ -34,11 +34,11 @@ for ARCHI in `ls /srv/gentoo-builder/kernels/`; do
     INSTALL_MOD_PATH=/srv/gentoo-builder/kernels/${ARCHI}/ make modules_install
     INSTALL_PATH=/srv/gentoo-builder/kernels/${ARCHI}/ make install
 done
-{{< / highlight >}}
+```
 
 ## Deploying on each node :
 
-{{< highlight sh >}}
+```sh
 export VERSION=5.4.28-gentoo-x86_64
 wget http://packages.adyxax.org/kernels/x86_64/System.map-${VERSION} -O /boot/System.map-${VERSION}
 wget http://packages.adyxax.org/kernels/x86_64/config-${VERSION} -O /boot/config-${VERSION}
@@ -53,4 +53,4 @@ make modules_prepare
 emerge @module-rebuild
 genkernel --install initramfs --ssh-host-keys=create-from-host
 grub-mkconfig -o /boot/grub/grub.cfg
-{{< / highlight >}}
+```

content/docs/gentoo/lxd.md

@@ -12,18 +12,18 @@ I have used LXD for many years successfully, I was never satisfied with the dock
 
 ## Installation
 
-{{< highlight sh >}}
+```sh
 touch /etc{/subuid,/subgid}
 usermod --add-subuids 1000000-1065535 root
 usermod --add-subgids 1000000-1065535 root
 emerge -q app-emulation/lxd
 /etc/init.d/lxd start
 rc-update add lxd default
-{{< /highlight >}}
+```
 
 ## Initial configuration
 
-{{< highlight sh >}}
+```sh
 myth /etc/init.d # lxd init
 Would you like to use LXD clustering? (yes/no) [default=no]:
 Do you want to configure a new storage pool? (yes/no) [default=yes]:
@@ -43,4 +43,4 @@ Trust password for new clients:
 Again:
 Would you like stale cached images to be updated automatically? (yes/no) [default=yes]
 Would you like a YAML "lxd init" preseed to be printed? (yes/no) [default=no]:
-{{< /highlight >}}
+```

content/docs/gentoo/steam.md

@@ -17,7 +17,7 @@ achieve that with containers but didn't quite made it work as well as this chroo
 Note that there is no way to provide a "most recent stage 3" installation link. You will have to browse http://distfiles.gentoo.org/releases/amd64/autobuilds/current-stage3-amd64/
 and adjust the download url manually bellow :
 
-{{< highlight sh >}}
+```sh
 mkdir /usr/local/steam
 cd /usr/local/steam
 wget http://distfiles.gentoo.org/releases/amd64/autobuilds/current-stage3-amd64/stage3-amd64-20190122T214501Z.tar.xz
@@ -74,13 +74,13 @@ wget -P /etc/portage/repos.conf/ https://raw.githubusercontent.com/anyc/steam-ov
 emaint sync --repo steam-overlay
 emerge games-util/steam-launcher -q
 useradd -m -G audio,video steam
-{{< /highlight >}}
+```
 
 ## Launch script
 
 Note that we use `su` and not `su -` since we need to preserve the environment. If you don't you won't get any sound in game. The pulseaudio socket is shared through the mount of
 /run inside the chroot :
-{{< highlight sh >}}
+```sh
 su
 cd /usr/local/steam
 mount -R /dev dev
@@ -93,4 +93,4 @@ chroot .
 env-update && source /etc/profile
 su steam
 steam
-{{< /highlight >}}
+```

content/docs/gentoo/upgrades.md

@@ -9,24 +9,24 @@ tags:
 ## Introduction
 
 Here is my go to set of commands when I upgrade a gentoo box :
-{{< highlight sh >}}
+```sh
 emerge-webrsync
 eselect news read
-{{< /highlight >}}
+```
 
 The news have to be reviewed carefully and if I cannot act on it immediately I copy paste the relevant bits to my todolist.
 
 ## The upgrade process
 
 I run the upgrade process in steps, the first one asking you to validate the upgrade path. You will also be prompted to validate before cleaning :
-{{< highlight sh >}}
+```sh
 emerge -qAavutDN world --verbose-conflicts --keep-going --with-bdeps=y && emerge --depclean -a && revdep-rebuild -i -- -q --keep-going; eclean --deep distfiles && eclean --deep packages && date
-{{< /highlight >}}
+```
 
 After all this completes it is time to evaluate configuration changes :
-{{< highlight sh >}}
+```sh
 etc-update
-{{< /highlight >}}
+```
 
 If a new kernel has been emerged, have a look at [the specific process for that]({{< ref "kernel_upgrades" >}}).
 

content/docs/openbsd/install_from_linux.md

@@ -12,12 +12,12 @@ This article explains a simple method to install OpenBSD when all you have is a
 ## How to
 
 First login as root on the linux you want to reinstall as Openbsd then fetch the installer :
-{{< highlight sh >}}
+```sh
 curl https://cdn.openbsd.org/pub/OpenBSD/6.8/amd64/bsd.rd -o /bsd.rd
-{{< /highlight >}}
+```
 
 Then edit the loader configuration, in this example grub2 :
-{{< highlight sh >}}
+```sh
 echo '
 menuentry "OpenBSD" {
 	set root=(hd0,msdos1)
@@ -25,6 +25,6 @@ menuentry "OpenBSD" {
 }' >> /etc/grub.d/40_custom
 echo 'GRUB_TIMEOUT=60' >> /etc/default/grub
 grub2-mkconfig > /boot/grub2/grub.cfg
-{{< /highlight >}}
+```
 
 If you reboot now and connect your remote console you should be able to boot the OpenBSD installer.

content/docs/openbsd/pf.md

@@ -10,7 +10,7 @@ tags:
 
 The open ports list is refined depending on the usage obviously, and not all servers listen for wireguard... It is just a template :
 
-{{< highlight conf >}}
+```cfg
 vpns="{ wg0 }"
 
 table <myself>   const { self }
@@ -39,4 +39,4 @@ pass in on $vpns from <private> to <myself>
 block return in on ! lo0 proto tcp to port 6000:6010
 # Port build user does not need network
 block return out log proto {tcp udp} user _pbuild
-{{< /highlight >}}
+```

content/docs/openbsd/smtpd.md

@@ -9,7 +9,7 @@ tags:
 
 Here is my template for a simple smtp relay. The host names in the outbound action are to be customized obviously, and in my setups `yen` the relay destination is only reachable via wireguard. If not in such setup, smtps with authentication is to be configured :
 
-{{< highlight conf >}}
+```cfg
 table aliases file:/etc/mail/aliases
 
 listen on socket
@@ -20,13 +20,13 @@ action "outbound" relay host "smtp://yen" mail-from "root+phoenix@adyxax.org"
 
 match from local for local action "local_mail"
 match from local for any action "outbound"
-{{< /highlight >}}
+```
 
 ## Primary mx
 
 Here is my primary mx configuration as a sample :
 
-{{< highlight conf >}}
+```cfg
 pki adyxax.org cert "/etc/ssl/yen.adyxax.org.crt"
 pki adyxax.org key  "/etc/ssl/private/yen.adyxax.org.key"
 
@@ -59,7 +59,7 @@ match  from local   for local action "local_mail"
 
 match from any   auth  for any action "outbound"
 match from mail-from "root+phoenix@adyxax.org" for any action "outbound"  # if you need to relay emails from another machine to the internet like I do
-{{< /highlight >}}
+```
 
 ## Secondary mx