--- title: Wireguard description: How to configure a wireguard endpoint on FreeBSD tags: - FreeBSD - vpn --- ## Introduction This article explains how to configure wireguard on FreeBSD. ## Installation ```sh pkg install wireguard ``` ## Generating keys The private and public keys for a host can be generated with the following commands: ```sh PRIVATE_KEY=`wg genkey` PUBLIC_KEY=`printf $PRIVATE_KEY|wg pubkey` echo private_key: $PRIVATE_KEY echo public_key: $PUBLIC_KEY ``` ## Configuration Here is a configuration example of my `/usr/local/etc/wireguard/wg0.conf` that creates a tunnel listening on udp port 342 and has one remote peer: ```cfg [Interface] PrivateKey = MzrfXLmSfTaCpkJWKwNlCSD20eDq7fo18aJ3Dl1D0gA= ListenPort = 342 Address = 10.1.2.7/24 [Peer] PublicKey = R4A01RXXqRJSY9TiKQrZGR85HsFNSXxhRKKEu/bEdTQ= Endpoint = 168.119.114.183:342 AllowedIPs = 10.1.2.9/32 PersistentKeepalive = 60 ``` To implement this example you will need to generate two sets of keys. The configuration for the first server will feature the first server's private key in the `[Interface]` section and the second server's public key in the `[Peer]` section, and vice versa for the configuration of the second server. This example is from a machine that can be hidden behind nat therefore I configure a `PersistentKeepalive`. If your host has a public IP this line is not needed. To activate the interface configuration, use : ```sh service wireguard enable echo 'wireguard_interfaces="wg0"' >> /etc/rc.conf service wireguard start ``` ## Administration The tunnel can be managed with the `wg` command: ```sh root@hurricane:~# wg interface: wg0 public key: 7fbr/yumFeTzXwxIHnEs462JLFToUyJ7yCOdeDFmP20= private key: (hidden) listening port: 342 peer: R4A01RXXqRJSY9TiKQrZGR85HsFNSXxhRKKEu/bEdTQ= endpoint: 168.119.114.183:342 allowed ips: 10.1.2.9/32 latest handshake: 57 seconds ago transfer: 1003.48 KiB received, 185.89 KiB sent persistent keepalive: every 1 minute ```