From f8329249d1fb0258b8acd3112d33d47a7293f72a Mon Sep 17 00:00:00 2001 From: Julien Dessaux Date: Sun, 28 Aug 2022 22:29:32 +0200 Subject: Updated previous home network articles --- content/blog/home/interfaces.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'content/blog/home/interfaces.md') diff --git a/content/blog/home/interfaces.md b/content/blog/home/interfaces.md index 9f867cc..2e4cc12 100644 --- a/content/blog/home/interfaces.md +++ b/content/blog/home/interfaces.md @@ -8,7 +8,9 @@ tags: ## Introduction -This article is the continuation of [the previous one]({{< ref "blog/home/home.md" >}}). Since posting I updated the last two paragraphs because I forgot two reasons for my design choices. You might want to read it again since the following articles implement those choices. +This article is the second one in a series about my home network: +- [part one: My home network]({{< ref "blog/home/home.md" >}}) +- [part three: Bridging and roaming on my home wifi]({{< ref "blog/home/wifi.md" >}}) If you try to follow this as a guide and something is not clear do not hesitate to shoot me an email asking for clarifications or screenshots! @@ -38,7 +40,7 @@ Now we can reconfigure the lan interface: And finally reconfigure the wan interface: - edit the wan interface and configure its final subnet: I use `192.168.1.5/24` to address the router with `192.168.1.1` as gateway (the address of my FAI's router on my LAN) -- Save and apply your changes +- save and apply your changes I leave the INPUT traffic allowed on my firewall because I intend to access my router from my LAN, which means through this interface named wan -- cgit v1.2.3