aboutsummaryrefslogtreecommitdiff
path: root/content/docs/gentoo
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--content/docs/gentoo/installation.md72
-rw-r--r--content/docs/gentoo/kernel_upgrades.md12
-rw-r--r--content/docs/gentoo/lxd.md8
-rw-r--r--content/docs/gentoo/steam.md8
-rw-r--r--content/docs/gentoo/upgrades.md12
5 files changed, 56 insertions, 56 deletions
diff --git a/content/docs/gentoo/installation.md b/content/docs/gentoo/installation.md
index b500252..0416a40 100644
--- a/content/docs/gentoo/installation.md
+++ b/content/docs/gentoo/installation.md
@@ -16,10 +16,10 @@ You can get a bootable iso or liveusb from https://www.gentoo.org/downloads/. I
Once you boot on the installation media, you can start sshd and set a temporary password and proceed with the installation more confortably from another machine :
-{{< highlight sh >}}
+```sh
/etc/init.d/sshd start
passwd
-{{< /highlight >}}
+```
Don't forget to either run `dhcpcd` or manually set an ip and gateway to the machine.
@@ -27,7 +27,7 @@ Don't forget to either run `dhcpcd` or manually set an ip and gateway to the mac
There are several options depending on wether you need soft raid, full disk encryption or a simple root device with no additional complications. It will also differ if you are using a virtual machine or a physical one.
-{{< highlight sh >}}
+```sh
tmux
blkdiscard /dev/nvme0n1
sgdisk -n1:0:+2M -t1:EF02 /dev/nvme0n1
@@ -37,7 +37,7 @@ mkfs.fat -F 32 -n efi-boot /dev/nvme0n1p2
mkfs.xfs /dev/nvme0n1p3
mount /dev/sda3 /mnt/gentoo
cd /mnt/gentoo
-{{< /highlight >}}
+```
Make sure you do not repeat the mistake I too often make by mounting something to /mnt while using the liveusb/livecd. You will lose your shell if you do this and will need to reboot!
@@ -46,109 +46,109 @@ Make sure you do not repeat the mistake I too often make by mounting something t
Get the stage 3 installation file from https://www.gentoo.org/downloads/. I personnaly use the non-multilib one from the advanced choices, since I am no longer using and 32bits software except steam, and I use steam from a multilib chroot.
Put the archive on the server in /mnt/gentoo (you can simply wget it from there), then extract it :
-{{< highlight sh >}}
+```sh
tar xpf stage3-*.tar.xz --xattrs-include='*.*' --numeric-owner
mount /dev/nvme0n1p2 boot
mount -R /proc proc
mount -R /sys sys
mount -R /dev dev
chroot .
-{{< /highlight >}}
+```
## Initial configuration
We prepare the local language of the system :
-{{< highlight sh >}}
+```sh
echo 'LANG="en_US.utf8"' > /etc/env.d/02locale
echo 'en_US.UTF-8 UTF-8' >> /etc/locale.gen
locale-gen
env-update && source /etc/profile
echo 'nameserver 1.1.1.1' > /etc/resolv.conf
-{{< /highlight >}}
+```
We set a loop device to hold the portage tree. It will be formatted with optimisation for the many small files that compose it :
-{{< highlight sh >}}
+```sh
mkdir -p /srv/gentoo-distfiles
truncate -s 10G /portage.img
mke2fs -b 1024 -i 2048 -m 0 -O "dir_index" -F /portage.img
tune2fs -c 0 -i 0 /portage.img
mkdir /usr/portage
mount -o loop,noatime,nodev /portage.img /usr/portage/
-{{< /highlight >}}
+```
We set default compilation options and flags. If you are not me and cannot rsync this location, you can browse it from https://packages.adyxax.org/x86-64/etc/portage/ :
-{{< highlight sh >}}
+```sh
rsync -a --delete packages.adyxax.org:/srv/gentoo-builder/x86-64/etc/portage/ /etc/portage/
sed -i /etc/portage/make.conf -e s/buildpkg/getbinpkg/
echo 'PORTAGE_BINHOST="https://packages.adyxax.org/x86-64/packages/"' >> /etc/portage/make.conf
-{{< /highlight >}}
+```
We get the portage tree and sync the timezone
-{{< highlight sh >}}
+```sh
emerge --sync
-{{< /highlight >}}
+```
## Set hostname and timezone
-{{< highlight sh >}}
+```sh
export HOSTNAME=XXXXX
sed -i /etc/conf.d/hostname -e /hostname=/s/=.*/=\"${HOSTNAME}\"/
echo "Europe/Paris" > /etc/timezone
emerge --config sys-libs/timezone-data
-{{< /highlight >}}
+```
## Check cpu flags and compatibility
TODO
-{{< highlight sh >}}
+```sh
emerge cpuid2cpuflags -1q
cpuid2cpuflags
gcc -### -march=native /usr/include/stdlib.h
-{{< /highlight >}}
+```
## Rebuild the system
-{{< highlight sh >}}
+```sh
emerge --quiet -e @world
emerge --quiet dosfstools app-admin/logrotate app-admin/syslog-ng app-portage/gentoolkit \
dev-vcs/git bird openvpn htop net-analyzer/tcpdump net-misc/bridge-utils \
sys-apps/i2c-tools sys-apps/pciutils sys-apps/usbutils sys-boot/grub sys-fs/ncdu \
sys-process/lsof net-vpn/wireguard-tools
emerge --unmerge nano -q
-{{< /highlight >}}
+```
## Grab a working kernel
Next we need to Grab a working kernel from our build server along with its modules. If you don't have one already, you have some work to do!
Check the necessary hardware support with :
-{{< highlight sh >}}
+```sh
i2cdetect -l
lspci -nnk
lsusb
-{{< /highlight >}}
+```
TODO specific page with details on how to build required modules like the nas for example.
-{{< highlight sh >}}
+```sh
emerge gentoo-sources genkernel -q
...
-{{< /highlight >}}
+```
## Final configuration steps
### fstab
-{{< highlight sh >}}
+```sh
# /etc/fstab: static file system information.
#
#<fs> <mountpoint> <type> <opts> <dump/pass>
/dev/vda3 / ext4 noatime,discard 0 1
/dev/vda2 /boot vfat noatime 1 2
/portage.img /usr/portage ext2 noatime,nodev,loop 0 0
-{{< /highlight >}}
+```
### networking
-{{< highlight sh >}}
+```sh
echo 'hostname="phoenix"' > /etc/conf.d/hostname
echo 'dns_domain_lo="adyxax.org"
config_eth0="192.168.1.3 netmask 255.255.255.0"
@@ -156,7 +156,7 @@ routes_eth0="default via 192.168.1.1"' > /etc/conf.d/net
cd /etc/init.d
ln -s net.lo net.eth0
rc-update add net.eth0 boot
-{{< /highlight >}}
+```
### Grub
@@ -170,28 +170,28 @@ grub-mkconfig -o /boot/grub/grub.cfg
### /etc/hosts
-{{< highlight sh >}}
+```sh
scp root@collab-jde.nexen.net:/etc/hosts /etc/
-{{< /highlight >}}
+```
### root account access
-{{< highlight sh >}}
+```sh
mkdir -p /root/.ssh
echo ' ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAILOJV391WFRYgCVA2plFB8W8sF9LfbzXZOrxqaOrrwco hurricane' > /root/.ssh/authorized_keys
passwd
-{{< /highlight >}}
+```
### Add necessary daemons on boot
-{{< highlight sh >}}
+```sh
rc-update add syslog-ng default
rc-update add cronie default
rc-update add sshd default
-{{< /highlight >}}
+```
## TODO
-{{< highlight sh >}}
+```sh
net-firewall/shorewall
...
rc-update add shorewall default
@@ -216,7 +216,7 @@ rc-update add docker default
app-emulation/lxd
rc-update add lxd default
-{{< /highlight >}}
+```
## References
diff --git a/content/docs/gentoo/kernel_upgrades.md b/content/docs/gentoo/kernel_upgrades.md
index b6f0adc..b438454 100644
--- a/content/docs/gentoo/kernel_upgrades.md
+++ b/content/docs/gentoo/kernel_upgrades.md
@@ -9,18 +9,18 @@ tags:
## Introduction
Now that I am mostly running OpenBSD servers I just use genkernel to build my custom configuration on each node with :
-{{< highlight sh >}}
+```sh
eselect kernel list
eselect kernel set 1
genkernel all --kernel-config=/proc/config.gz --menuconfig
nvim --diff /proc/config.gz /usr/src/linux/.config
-{{< / highlight >}}
+```
Bellow you will find how I did things previously when centralising the build of all kernels on a collab-jde machine, and distributing them all afterwards. Local nodes would only rebuild local modules and get on with their lives.
## Building on collab-jde
-{{< highlight sh >}}
+```sh
PREV_VERSION=4.14.78-gentoo
eselect kernel list
eselect kernel set 1
@@ -34,11 +34,11 @@ for ARCHI in `ls /srv/gentoo-builder/kernels/`; do
INSTALL_MOD_PATH=/srv/gentoo-builder/kernels/${ARCHI}/ make modules_install
INSTALL_PATH=/srv/gentoo-builder/kernels/${ARCHI}/ make install
done
-{{< / highlight >}}
+```
## Deploying on each node :
-{{< highlight sh >}}
+```sh
export VERSION=5.4.28-gentoo-x86_64
wget http://packages.adyxax.org/kernels/x86_64/System.map-${VERSION} -O /boot/System.map-${VERSION}
wget http://packages.adyxax.org/kernels/x86_64/config-${VERSION} -O /boot/config-${VERSION}
@@ -53,4 +53,4 @@ make modules_prepare
emerge @module-rebuild
genkernel --install initramfs --ssh-host-keys=create-from-host
grub-mkconfig -o /boot/grub/grub.cfg
-{{< / highlight >}}
+```
diff --git a/content/docs/gentoo/lxd.md b/content/docs/gentoo/lxd.md
index 0e2dfdd..60d199a 100644
--- a/content/docs/gentoo/lxd.md
+++ b/content/docs/gentoo/lxd.md
@@ -12,18 +12,18 @@ I have used LXD for many years successfully, I was never satisfied with the dock
## Installation
-{{< highlight sh >}}
+```sh
touch /etc{/subuid,/subgid}
usermod --add-subuids 1000000-1065535 root
usermod --add-subgids 1000000-1065535 root
emerge -q app-emulation/lxd
/etc/init.d/lxd start
rc-update add lxd default
-{{< /highlight >}}
+```
## Initial configuration
-{{< highlight sh >}}
+```sh
myth /etc/init.d # lxd init
Would you like to use LXD clustering? (yes/no) [default=no]:
Do you want to configure a new storage pool? (yes/no) [default=yes]:
@@ -43,4 +43,4 @@ Trust password for new clients:
Again:
Would you like stale cached images to be updated automatically? (yes/no) [default=yes]
Would you like a YAML "lxd init" preseed to be printed? (yes/no) [default=no]:
-{{< /highlight >}}
+```
diff --git a/content/docs/gentoo/steam.md b/content/docs/gentoo/steam.md
index 26a2a2f..906a62f 100644
--- a/content/docs/gentoo/steam.md
+++ b/content/docs/gentoo/steam.md
@@ -17,7 +17,7 @@ achieve that with containers but didn't quite made it work as well as this chroo
Note that there is no way to provide a "most recent stage 3" installation link. You will have to browse http://distfiles.gentoo.org/releases/amd64/autobuilds/current-stage3-amd64/
and adjust the download url manually bellow :
-{{< highlight sh >}}
+```sh
mkdir /usr/local/steam
cd /usr/local/steam
wget http://distfiles.gentoo.org/releases/amd64/autobuilds/current-stage3-amd64/stage3-amd64-20190122T214501Z.tar.xz
@@ -74,13 +74,13 @@ wget -P /etc/portage/repos.conf/ https://raw.githubusercontent.com/anyc/steam-ov
emaint sync --repo steam-overlay
emerge games-util/steam-launcher -q
useradd -m -G audio,video steam
-{{< /highlight >}}
+```
## Launch script
Note that we use `su` and not `su -` since we need to preserve the environment. If you don't you won't get any sound in game. The pulseaudio socket is shared through the mount of
/run inside the chroot :
-{{< highlight sh >}}
+```sh
su
cd /usr/local/steam
mount -R /dev dev
@@ -93,4 +93,4 @@ chroot .
env-update && source /etc/profile
su steam
steam
-{{< /highlight >}}
+```
diff --git a/content/docs/gentoo/upgrades.md b/content/docs/gentoo/upgrades.md
index 83f3c56..4984cd7 100644
--- a/content/docs/gentoo/upgrades.md
+++ b/content/docs/gentoo/upgrades.md
@@ -9,24 +9,24 @@ tags:
## Introduction
Here is my go to set of commands when I upgrade a gentoo box :
-{{< highlight sh >}}
+```sh
emerge-webrsync
eselect news read
-{{< /highlight >}}
+```
The news have to be reviewed carefully and if I cannot act on it immediately I copy paste the relevant bits to my todolist.
## The upgrade process
I run the upgrade process in steps, the first one asking you to validate the upgrade path. You will also be prompted to validate before cleaning :
-{{< highlight sh >}}
+```sh
emerge -qAavutDN world --verbose-conflicts --keep-going --with-bdeps=y && emerge --depclean -a && revdep-rebuild -i -- -q --keep-going; eclean --deep distfiles && eclean --deep packages && date
-{{< /highlight >}}
+```
After all this completes it is time to evaluate configuration changes :
-{{< highlight sh >}}
+```sh
etc-update
-{{< /highlight >}}
+```
If a new kernel has been emerged, have a look at [the specific process for that]({{< ref "kernel_upgrades" >}}).