aboutsummaryrefslogtreecommitdiff
path: root/content/blog/OpenBSD
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--content/blog/OpenBSD/wireguard.md96
1 files changed, 96 insertions, 0 deletions
diff --git a/content/blog/OpenBSD/wireguard.md b/content/blog/OpenBSD/wireguard.md
new file mode 100644
index 0000000..d15c625
--- /dev/null
+++ b/content/blog/OpenBSD/wireguard.md
@@ -0,0 +1,96 @@
+---
+title: Wireguard on OpenBSD
+description: How to configure a wireguard endpoint on OpenBSD
+date: 2023-02-15
+tags:
+- OpenBSD
+- vpn
+- wireguard
+---
+
+## Introduction
+
+This article explains how to configure wireguard on OpenBSD.
+
+I chose to kick off this wireguard series with OpenBSD because it is the cleanest and the better integrated of all operating systems that support wireguard.
+
+## Installation
+
+OpenBSD does things elegantly as usual : where linux distributions have a service, OpenBSD has a simple `/etc/hostname.wg0` file. The interface is therefore managed without any tool other than the standard ifconfig, it's so simple and elegant!
+
+If you want you can still install the usual tooling with:
+```sh
+pkg_add wireguard-tools
+```
+
+## Generating keys
+
+The private and public keys for a host can be generated with the following commands:
+```sh
+PRIVATE_KEY=`wg genkey`
+PUBLIC_KEY=`printf $PRIVATE_KEY|wg pubkey`
+echo private_key: $PRIVATE_KEY
+echo public_key: $PUBLIC_KEY
+```
+
+Private keys can also be generated with the following command if you do not wish to use the `wg` tool:
+```sh
+openssl rand -base64 32
+```
+
+I am not aware of an openssl command to extract the corresponding public key, but after setting up your interface `ifconfig` will kindly show it to you.
+
+## Configuration
+
+Here is a configuration example of my `/etc/hostname.wg0` that creates a tunnel listening on udp port 342 and several peers :
+```cfg
+wgport 342 wgkey '4J7O3IN7+MnyoBpxqDbDZyAQ3LUzmcR2tHLdN0MgnH8='
+10.1.2.1/24
+wgpeer 'LWZO5wmkmzFwohwtvZ2Df6WAvGchcyXpzNEq2m86sSE=' wgaip 10.1.2.2/32
+wgpeer 'SjqCIBpTjtkMvKtkgDFIPJsAmQEK/+H33euekrANJVc=' wgaip 10.1.2.4/32
+wgpeer '4CcAq3xqN496qg2JR/5nYTdJPABry4n2Kon96wz981I=' wgaip 10.1.2.8/32
+wgpeer 'vNNic3jvXfbBahF8XFKnAv9+Cef/iQ6nWxXeOBtehgc=' wgaip 10.1.2.6/32
+up
+```
+
+Your private key goes on the first line as argument to `wgkey`, the other keys are public keys for each peer. As all other hostname interface files on OpenBSD, each line is a valid argument you could pass the `ifconfig` command.
+
+To re-read the interface configuration, use :
+```sh
+sh /etc/netstart wg0
+```
+
+## Administration
+
+The tunnel can be managed with the standard `ifconfig` command:
+```sh
+root@yen:~# ifconfig wg0
+wg0: flags=80c3<UP,BROADCAST,RUNNING,NOARP,MULTICAST> mtu 1420
+ index 4 priority 0 llprio 3
+ wgport 342
+ wgpubkey R4A01RXXqRJSY9TiKQrZGR85HsFNSXxhRKKEu/bEdTQ=
+ wgpeer LWZO5wmkmzFwohwtvZ2Df6WAvGchcyXpzNEq2m86sSE=
+ wgendpoint 90.66.117.156 1024
+ tx: 158515972, rx: 151576036
+ last handshake: 93 seconds ago
+ wgaip 10.1.2.2/32
+ wgpeer SjqCIBpTjtkMvKtkgDFIPJsAmQEK/+H33euekrANJVc=
+ wgendpoint 90.66.117.156 51110
+ tx: 30969024, rx: 14034688
+ last handshake: 9527 seconds ago
+ wgaip 10.1.2.4/32
+ wgpeer 4CcAq3xqN496qg2JR/5nYTdJPABry4n2Kon96wz981I=
+ wgendpoint 90.66.117.156 46247
+ tx: 36877516, rx: 19036472
+ last handshake: 23 seconds ago
+ wgaip 10.1.2.8/32
+ wgpeer vNNic3jvXfbBahF8XFKnAv9+Cef/iQ6nWxXeOBtehgc=
+ wgendpoint 90.66.117.156 1025
+ tx: 150787792, rx: 146836696
+ last handshake: 43 seconds ago
+ wgaip 10.1.2.6/32
+ groups: wg
+ inet 10.1.2.1 netmask 0xffffff00 broadcast 10.1.2.255
+```
+
+Alternatively you can also use the `wg` tool if you installed it.